欢迎光临南京国都地坪科技有限公司官网!

企业邮箱 收藏本站收藏本站 网站地图

国都地坪

南京国都地坪科技有限公司为客户提供优质全面的地坪系统设计及地面问题解决方案
全国咨询热线:137-7148-9633

热门搜索关键词: 环氧地坪  南京环氧地坪  无锡环氧地坪  苏州环氧地坪  无锡环氧地坪工程  无锡环氧地坪施工  

当前位置:首页 > 关于我们 > 施工设备

环氧地坪施工常用工具汇总。不管做什么,首先要用武器才能打仗,有齐全完整的武器才能打胜仗,做地坪工程的师傅一样如此,工具具备了才能做好地坪,但是有些新手还不知道要准备哪些东西,下面总结下,常用工具大全。 Make a summary of common tools for epoxy floor construction. Whatever you do, you have to use weapons to fight first. You have complete weapons to win the battle. Just like a master who works on the floor, you can only do a good job with tools. But some novices still don't know what to prepare. Here's a summary of commonly used tools. 

1、切缝机与打胶枪: 1. Sewing machine and glue gun:

用于缝隙的处理,切割机用于将缝隙切割和修饰成“V”字形或梯形(宽5-10mm)以方便填补和灌注;而打胶枪用于灌注聚氨酯弹性胶。 For gap treatment, the cutting machine is used to cut and modify the gap into "V" shape or trapezoid (5-10mm wide) to facilitate filling and filling, while the glue gun is used for filling polyurethane elastomer.

2、称量与搅拌工具: 2. Weighing and mixing tools:

较高精度的称量工具有利于按比例准确配制多组份地坪涂料,使用电动搅拌器充分快速地混合和搅拌涂料。 Higher precision weighing tools are conducive to the accurate preparation of multi-component floor coatings in proportion, and the use of electric mixers to mix and mix coatings quickly and fully.

3、导静电电阻测定仪: 3. Electrostatic conductivity resistance tester:

用以测定防静电地坪的导静电电阻率。 It is used to measure the conductive resistivity of anti-static floor.

4、基材含水率测定仪: 4. Substrate Moisture Content Measuring Instrument:

用以测定基材含水率以判定是否符合涂装要求。 It is used to determine the moisture content of the base material to determine whether it meets the painting requirements.

5、底材表面温度及环境温湿度仪: 5. Substrate Surface Temperature and Ambient Temperature and Humidity Meter:

测定涂装环境温湿度及底材表面温度以确定是否满足涂装要求。 Measure the temperature and humidity of the coating environment and the surface temperature of the substrate to determine whether the coating requirements are met.

6、抛光机与砂带机: 6. Polishing machine and abrasive belt machine:

配以80~120目的磨片及砂带,在涂装面漆前打磨砂浆或腻子层以获得平整细腻的表面;配以较粗(20~40目)的磨片及砂带亦可以用于混凝土等基材表面的简易打磨处理。 With 80-120 mesh abrasive discs and belts, the smooth and delicate surface can be obtained by polishing the mortar or putty layer before painting. The coarse (20-40 mesh) abrasive discs and belts can also be used for simple polishing of the surface of concrete and other substrates.

7、大打磨机: 7. Big grinder:

高效快速的中涂层打磨设备。 High efficient and fast medium coating grinding equipment.

8、砂浆搅拌机、铺料器与抹光机: 8. Mortar mixer, paver and polisher:

用于施工厚层(≥3mm)树脂砂浆,将搅拌均匀的树脂砂浆用铺料器摊铺于地板上,采用抹光机抹平。 For the construction of thick layer (> 3mm) resin mortar, the uniformly stirred resin mortar is spread on the floor with a paver and smoothed by a polisher.

9、空气喷涂设备: 9. Air spraying equipment:

包括空气压缩机和空气喷枪,可用于喷涂施工低粘度的地坪涂料。 Including air compressor and air spraying gun, it can be used for spraying low viscosity floor coating.

10、无空气喷涂机: 10. Air-free spraying machine:

用于喷涂施工地坪面漆,效率高,易获得良好的装饰效果,易控制涂料耗量;须根据涂料粘度及使用期选择喷泵和喷咀,以获得适合的流体压力和流量。通常电驱动或内燃机驱动的高压无气喷涂机因其良好的便携性而得到广泛应用。 Used for spraying construction floor finish, high efficiency, easy to obtain good decorative effect, easy to control paint consumption; spray pump and nozzle should be selected according to paint viscosity and service life to obtain suitable fluid pressure and flow rate. Usually high pressure airless spraying machine driven by electric or internal combustion engine is widely used because of its good portability.

11、辊筒与漆刷: 11. Rollers and brushes:

质量优异、不掉毛的辊筒和刷子方能获得良好的外观,通常短毛辊筒具有更好的操作性。 Excellent quality, no hair loss roller and brush can get a good appearance, usually short hair roller has better operability.

12、平底刮板: 12. Flat bottom scraper:

用于刮涂底漆、砂浆、腻子等稠厚地坪涂料,适合于紧贴地面刮涂。 For scraping primer, mortar, putty and other thick floor coatings, suitable for scraping close to the ground.

13、锯齿镘刀、钉鞋、钉子辊筒: 13. Sawtooth trowel, nail shoe and nail roller:

锯齿镘刀用于镘涂自流平地坪涂料,然后用钉子辊筒辊压以释出膜内空气,对于局部涂装缺陷可在涂膜表干前穿钉鞋前往修复。 Sawtooth trowel is used to apply self-leveling floor coating, and then the air inside the film is released by roller pressing with nail. For local coating defects, the nail shoe can be worn to repair before the coating surface is dry.

14、吸尘器:去除地面灰尘。 14. Vacuum cleaner: remove ground dust.

15、抛丸设备: 15. Shot blasting equipment:

用于大面积混凝土、水磨石、硬化耐磨地面、大理石等基材表面抛丸处理。 It is used for shot blasting treatment of large area concrete, terrazzo, hardened wear-resistant ground, marble and other base materials.

16、铣刨机:用于铣刨去除旧漆层、油污层等。 16. Milling Machine: Used for milling to remove old paint layer, oil stain layer, etc.

17、便携式磨削机: 17. Portable grinders:

用于小面积混凝土、水磨石、硬化耐磨地面、大理石等基材表面或边角部位打磨处理,亦可用于去除小面积的旧漆和油污层。 It can be used to grind the surface or corner of small area concrete, terrazzo, hardened wear-resistant ground, marble and other substrates. It can also be used to remove small area old paint and oil stain layer.

18、磨削机:装配金刚研磨刀,用于混凝土、水磨石、硬化耐磨地面、大理石等基材表面打磨处理。 Grinding Machine: Assemble diamond grinding knife for grinding concrete, terrazzo, hardened wear-resistant ground, marble and other substrates.

以上就是关于做地坪工程的需要具备的工具,但是工具有了,关键还得会使用,只能多尝试,多操作,熟能生巧才能灵活运用,希望对大家有帮助。 Above is about the tools needed to do the floor engineering, but when the tools are available, the key is to use them. We can only try more and operate more. Practice makes perfect to use them flexibly. I hope it will be helpful to you all.