Epoxy floor is widely used because of its high strength, wear resistance and other excellent properties. The batch scraping of epoxy floor coating is a key part in the construction of epoxy floor. First of all, we need to know the purpose of batch scraping construction of epoxy floor. 1. Thickening, resin coating to meet user requirements of thickness; 2. Shaping, through the batch scraping of the coating to fill the pits in the floor. As an important part of the construction of epoxy flooring, batch scraping of coating links can ensure the quality of epoxy flooring and satisfy customers only by grasping its every step.
Secondly, the scraping layer of epoxy resin floor needs multi-pass scraping, and after each batch scraping and curing, it often needs grinding, which is related to the quality of the next process.
Thirdly, the angular polisher is traditionally used in the polishing of batch scraping coatings.
The use of polisher plays an important role in the quality of epoxy floor, so we should pay attention to avoid the following problems when using polisher: in the construction process, the workers who operate squat work, labor intensity is high and work efficiency is low; because the angular polisher is difficult to connect with vacuum equipment in the construction process, so the dust in the construction process is large, and it will affect workers. Health is very harmful.
Because the angular polisher uses series excitation motor, its load capacity is poor, it can not bear the pressure of contact with the ground when grinding, and the current is too large. When the angular polisher is used to grind the ground by manual operation, the grinding disc contacts with the ground mostly locally, which easily causes uneven force on the grinding disc, excessive damage and large consumption of the grinding disc. The situation.
In view of this situation, some constructors try to install abrasive discs on the ground grinder to polish the scraping of the middle coating batch. This not only solves the above problems, but also improves the efficiency of work.第四、用树脂砂浆搅拌机将树脂砂浆搅拌均匀，将搅拌好的树脂砂浆用摊铺机按顾客要求的厚度摊于素地表面，然后再用抹平机抹平。
Fourth, mix resin mortar evenly with resin mortar mixer, spread the mixing resin mortar paver on the surface of plain surface according to the thickness required by customers, and then smoothed with a smoother.